SDG data protection blog

IT security

Setting up BCM: Business Continuity Management under BSI 200-4

13 November 2026 by Sebastian Baier · Reading time approx. 13 minutes

Business continuity management (BCM) ensures that your company can keep working after a cyber attack, a fire or the failure of a service provider, at least at a previously defined minimum level. You set it up by identifying time-critical business processes, determining how long they may be down, drawing up emergency plans and practising them regularly. The recognised guide for this is BSI Standard 200-4 from the BSI (the German Federal Office for Information Security). It offers three tiers so that small and medium-sized companies can also get started with a manageable amount of effort.

Today, ransomware not only paralyses IT but takes production, order intake and invoicing down with it. The question is therefore not whether an emergency will occur, but whether you will know what to do when it does.

Why every company needs BCM

Companies today depend more than ever on their IT, supply chains and service providers. At the same time, buffers have shrunk under pressure to be efficient. Alongside extreme weather, BSI Standard 200-4 expressly cites cyber attacks and ransomware as reasons why emergency preparedness has become more important.

BCM gives you:

  • Ability to survive: time-critical processes keep running in an emergency or are available again within a defined time.
  • Ability to act: when it really matters, everyone knows who decides, who is informed and which plan applies.
  • Transparency: the analysis reveals dependencies and weaknesses that also cost money in normal operations, such as individual people or systems without which nothing works.
  • Trust: customers, insurers and business partners increasingly ask how you would cope with an outage.

The topic is also firmly on the regulatory agenda: companies under NIS2 must ensure business continuity under Section 30 (2) no. 3 BSIG, with backup management, disaster recovery and crisis management. With controls A.5.29 and A.5.30, ISO 27001 contains requirements for information security during disruption and ICT readiness for business continuity. BCM under BSI Standard 200-4 covers these requirements in a structured way, but it also makes sense without a legal obligation.

Cyber insurance is no substitute for BCM. Many cyber insurance policies exclude damage caused by war and state cyber attacks. The non-binding model conditions of the GDV (the German Insurance Association; AVB Cyber, as of February 2024, clause A1-17.2) provide for such an exclusion, for state attacks in the event that critical infrastructures also fail or are impaired as a result. Particularly in large-scale attacks, insurance cover may therefore lapse. What counts then is whether your company itself remains able to act.

Disruption, emergency, crisis: the terms

The standard distinguishes between three levels. The distinction determines when your emergency mode kicks in.

Term Meaning Who handles it?
Disruption processes or resources are not available as intended but can be restored within normal operations the normal organisation
Emergency at least one time-critical process fails and cannot be restored within normal operations within the maximum tolerable period of disruption; plans exist or can be adapted a special organisational structure (BAO) with a crisis team
Crisis a major damaging event for which no suitable plans exist or the existing ones do not work the BAO, depending on the situation
Important

An emergency can already be declared when an interruption is imminent. And: important is not the same as time-critical. A process is only time-critical if its failure causes intolerable damage within a certain time.

BSI Standard 200-4 and ISO 22301

BSI Standard 200-4 (version 1.0, May 2023) is the German practical guide to business continuity management. It replaces the former BSI Standard 100-4 on emergency management. The standard implements the international standard ISO 22301:2019 in a practical way. Anyone who fully implements the highest tier meets the requirements of ISO 22301 and can be certified.

An existing ISMS is not a prerequisite. However, if you already operate an ISMS based on ISO 27001, you can build on its scope, risk management and document control.

The tier model: reactive, build-up or standard?

The tier model (chapter 2.6) is the most important new feature of the standard. It distinguishes two dimensions: how completely the methodology is applied and how many business processes are considered.

Reactive BCMS Build-up BCMS Standard BCMS
Objective to be able to respond quickly to emergencies to secure everything completely, step by step to secure all business processes within the scope
Methodology simplified complete complete
Process coverage selected time-critical processes the most time-critical processes first, coverage grows with each cycle complete
Effort low, existing resources and small investments medium high
ISO 22301 no no compliant, ready for certification
Suitable for getting started without prior experience, unless regulatory requirements rule it out companies with experience of management systems or some experience of crisis management regulated companies and companies with an established BCMS

Reactive BCMS: the entry tier. It focuses on being able to act in an emergency: crisis team, alerting and simple business continuity plans for the most important processes. A lot is deliberately left out, such as risk analysis, continuity strategies and restart plans. The standard envisages moving to a higher tier after one cycle.

Build-up BCMS: the full methodology, but initially only for some of the processes. A pre-filter selects the most time-critical ones, and the coverage grows with each cycle. The standard describes this tier as a very good balance between effort and benefit.

Standard BCMS: all business processes within the scope are analysed and secured. According to the standard, every organisation should aim for this tier.

Our recommendation for medium-sized companies: if you are starting from scratch and are not subject to regulation, begin with the reactive BCMS and you will quickly be ready for emergencies. Companies with ISO 27001 or other management system experience start directly with the build-up BCMS. If you fall under NIS2 or are aiming for certification, plan the standard BCMS as your goal. Management sets out the path there in a roadmap.

Setting up BCM in six steps

The standard follows the PDCA cycle (plan, do, check, act). In practice, chapters 3 to 12 can be grouped into six steps.

1. Involve management and define the framework

Management takes responsibility, defines the objectives, tier and scope and appoints a business continuity officer. It also determines the period for which provision is made. According to the standard, 14 to 30 days is usual in practice. The result is the BCMS policy, the highest-ranking document.

As with the ISMS: define the scope carefully right at the start. Which sites, organisational units and processes are included, and what interfaces with service providers are there? A vague scope leaves every later analysis open to challenge.

2. Becoming crisis-ready: crisis team and alerting

In an emergency, you need a special organisational structure (BAO): a crisis team with a core team from management, IT, HR, facilities and communications, clear alerting and escalation channels, immediate measures, a crisis team room and rules for emergency and crisis communication. In the reactive BCMS this is the first step, because it has the quickest effect.

3. Business impact analysis (BIA)

The BIA is the core. It determines which business processes are time-critical, how long they may be down, which emergency operation level is sufficient and which resources they need: staff, IT, buildings, service providers, information. It considers the worst-case impact of a failure, not the causes. In the reactive and build-up BCMS, a BIA pre-filter narrows down the processes roughly beforehand.

Important

A BIA requires your business processes to be defined: workflow, responsible persons, dependencies and the resources needed. Only if you know your processes can you assess which of them are time-critical. If there is no such process overview, process modelling comes first. We support you with this as consultants.

4. Target/actual comparison and risk analysis

The target/actual comparison shows whether the existing solutions achieve the targets from the BIA, for example whether a server is actually running again within the required time. Management confirms the gaps. In the build-up and standard BCMS, this is followed by a BCM risk analysis of causes and threats, for example in line with BSI Standard 200-3.

5. Defining continuity strategies

You develop alternatives for each type of resource: alternative workplaces, remote working, redundant systems, a second supplier, deputy arrangements. They are evaluated according to restart time, emergency operation level, residual risk and costs. Management decides, and an implementation plan follows.

6. Drawing up emergency plans

The emergency manual brings together the plans for when it really matters:

Business continuity plans

How a process continues in emergency operation, in practice one plan per organisational unit

Restart plans

How a time-critical resource, such as an IT system, is brought into emergency operation; mandatory for all time-critical resources

Recovery plans

How normal operations are restored; not strictly required by the standard, but advisable

MTPD, RTO and RPO explained

Metric Meaning Example
MTPD (maximum tolerable period of disruption) how long a process may be down before the damage becomes intolerable order intake: 3 days
RTO (recovery time objective) time from the declaration of the emergency until the emergency solution is running; must be shorter than the MTPD minus the time the crisis team needs to declare the emergency ERP in emergency operation after 24 hours
RPO (recovery point objective, maximum acceptable data loss) how much data may be lost in an emergency, independently of MTPD and RTO no more than 4 hours of bookings
Emergency operation level the minimum performance the emergency operation must deliver 60 % of orders, priority for existing customers

The example values are for illustration only. Your values result from the BIA. The target/actual comparison sets them against the times that can actually be achieved. Incidentally, high availability in normal operations, say 99.9 % per year, says nothing about how quickly a system is running again after a total failure.

Exercising and improving

An emergency manual that has never been practised fails when it really matters. The standard names five types of exercise:

Type of exercise Content
Plan review go through the plan at the table and check it for gaps
Alerting exercise does the alerting chain work?
Crisis team exercise cooperation and decisions in the crisis team
Command post exercise crisis team together with other units, up to a full-scale exercise
Functional test actually carry out measures, such as a restore

The standard provides for alerting and crisis team exercises in all tiers. They are based on an exercise plan covering at least twelve months. In the build-up and standard BCMS, every member of the crisis team should take part in an exercise at least once every three years. Start with announced, simple exercises and increase the complexity.

The cycle then closes: metrics, audits and the management review show where the BCMS needs to be sharpened and when it is time to move to the next tier.

BCM, ISMS and the business continuity officer

BCM and ISMS complement each other. An ISMS protects confidentiality, integrity and availability in normal operations. BCM takes over when these measures fail and ensures orderly emergency operation. IT emergency management (IT service continuity management) feeds into BCM, but it is not the same thing: not every IT outage is an emergency for the company.

Responsibility remains with management. Operationally, a business continuity officer (formerly BCM officer) manages the methodology, analyses, plans and reports. The standard recommends placing the role as a staff function reporting directly to management rather than in the IT department, and allowing at least half a full-time position for it. Many medium-sized companies do not have this capacity and therefore fill the role externally.

The role can work together with that of the information security officer; the two topics overlap in risk analysis, incident handling and service provider management. Operators of critical facilities can find the requirements for their BCMS in the evidence section of the KRITIS area.

How SDG supports you

We support you from the initial consultation to a tested emergency manual. We need your input above all for the business impact analysis and for agreeing the plans with the business units and IT. The overview page shows how BCM fits into our information security consulting.

  • Assessment and choice of tier: free initial consultation and gap analysis, recommendation for a reactive, build-up or standard BCMS with a roadmap
  • Process modelling: if your business processes have not yet been described, we support you as consultants in capturing and modelling them, as the basis for the BIA.
  • Setting up the BCMS under BSI Standard 200-4: policy, scope, BAO, BIA, strategies and emergency manual
  • External business continuity officer: we take on the role with certified business continuity officers from our team.
  • Exercises: design, facilitation and evaluation of plan reviews, alerting and crisis team exercises
  • Integration with ISMS and NIS2: common scope and coordinated risk analysis with ISO 27001 and the NIS2 obligations
  • Training for management and the crisis team: Training

Frequently asked questions about business continuity management

What is BCM?

Business continuity management is a management system that a company uses to ensure that time-critical business processes keep running even in the event of serious incidents such as cyber attacks, fires or supplier failures, or are available again within a defined time.

How do I set up BCM?

Management defines the objectives, tier and scope and appoints a business continuity officer. This is followed by the crisis team and alerting, the business impact analysis, a target/actual comparison, continuity strategies and the emergency manual. Regular exercises and improvements close the cycle.

Which tiers does BSI Standard 200-4 have?

Three: the reactive BCMS as a simplified entry point for selected time-critical processes, the build-up BCMS with the full methodology for a growing range of processes, and the standard BCMS for all processes within the scope, which corresponds to ISO 22301.

Does BSI Standard 200-4 replace Standard 100-4?

Yes. BSI Standard 200-4 replaces the former Standard 100-4 on emergency management and introduces, among other things, the tier model.

Do I need an ISMS for BCM?

No. An ISMS is not a prerequisite. But the two systems complement each other: the ISMS protects normal operations, and BCM ensures emergency operation when these measures fail.

What is the difference between RTO and MTPD?

The MTPD is the maximum tolerable period of disruption of a process. The RTO is the time from the declaration of the emergency until the emergency solution is running. It must be shorter than the MTPD, because detection, alerting and decision-making also take time.

Can I be certified with BCM under BSI Standard 200-4?

Yes, via the standard BCMS. It corresponds to ISO 22301 and, when fully implemented, reaches the maturity needed for certification under that standard.

Can the business continuity officer role be filled externally?

Yes. The standard recommends at least half a full-time position for the role and placing it close to management. Especially in medium-sized companies, filling the role externally is therefore often the more economical solution.


Sources: BSI Standard 200-4 Business Continuity Management, Section 30 BSIG

Note: this article is for general information only and does not replace advice in the individual case. The recommendations on the choice of tier reflect SDG's professional assessment.